Hicarer High Torque Long Shaft Clock Movement Mechanism with 12 Inch Long Spade Hands (Black)


High torque long shaft clock movement mechanism with 12 inch long spade hands

Kindly reminder:
There is a printing mistake in the instruction; The 8th instruction is wrong; Our package not includes screw minute nut; We are sorry for any convenience being brought to you.

Features:
Total shaft length is 28 mm and its thread length is 15.4 mm, applicable for 9 – 13 mm (9/ 25 – 1/ 2 inches) thickness clock panel.

Application:
You can use the clock movement to repair, replace or make a clock, suitable for cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc..

Easy and simple design:
The component parts are easy to assemble together and the black metal hands can be painted with any color to match your clock.

Specifications:
Material: plastic and aluminum
Case size: approx. 55 x 55 x 16 mm (2.2 x 2.2 x 0.63 inches)
Hour hand length: total length is 216 mm/ 8.5 inch; Center hole to the tip is 203 mm/ 8.0 inch
Minute hand length: total length is 385 mm/ 15.2 inch; Center hole to the tip is 305 mm/ 12 inch
Power: 1.5V AA 1 x battery (not included)

Package includes:
1 x Quartz clock movement
1 x Close nuts
1 x Minute hand
1 x Hour hand
1 x Plastic washer
1 x Brass washer
1 x Brass nut
1 x Metal hook

Warm notice: 
There are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent.

Product Features

  • Clock movement: high torque clock movement with hook, long shaft, drive long clock hands (10 mm to 450 mm)
  • Total shaft length: 28 mm (1-1/ 10 inches), thread length: 15.4 mm (3/ 5 inches), suitable for 9 – 13 mm (9/ 25 – 1/ 2 inches) thickness clock panel
  • Size from the center of the hole to the tip: the hour hand is approx. 203 mm/ 8.0 inches long; The minute hand is about 305 mm/ 12 inches in length
  • Good DIY clock supply: suitable for repairing, replacing the broken parts of a clock or serving as good handwork materials to make a clock by yourself
  • Warm notice: there are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent

3 thoughts on “Hicarer High Torque Long Shaft Clock Movement Mechanism with 12 Inch Long Spade Hands (Black)

  1. I couldn’t wait to put it on! It is a really nice clock hand. The directions were pretty straight forward, but can be a little confusing at first. It took like 10 mins to put it together, so not too bad. It looks really nice on my clock. My mom gave me this clock a while ago, but it was broken. I am so glad I was able to find clock hands that were large enough for my clock. I couldn’t find any in stores large enough to fit it. The hands are a little more bendable then I would…

    View Comment
  2. PERFECT! The most affordable clock hands that WORK GREAT I’ve found yet! Long story short, if you’re looking to make a clock, USE THIS BRAND! You can’t beat the price!Long story long, I make wooden clocks to sell as a little side hustle, and so far, these are the best and most affordable clock hands & mechanism combo I’ve found! I used to use clock hands from Hobby Lobby, but they were more expensive, super flimsy and broke ALL the time, both when I would install it and would stop working for my customers. So I looked around for a better alternative and found…

    View Comment

Comments are closed.