Quartz DIY Wall Clock Movement Mechanisms Battery Powered DIY Repair Parts Replacement with 2 Long Hands,3/10 Inch Maximum Dial Thickness,29/32 Inch Total Shaft Length. …

Features:
Kindly note:
This clock Mechanism can not install the second hand.

Easy and simple design
Suitable for repairing, replacing or making a clock
Material: plastic and aluminum
Second hand motion: Step
Accuracy Within ±30seconds deviation each month (in normal temperature)
Battery: one 1.5V Carbon-zinc batteries only,not included.
Please DO NOT USE Alkaline battery,Rechargeable batteries,they will damage the movement.

Dimensions:

Case size: approx. 56 x 56 x 16 mm (2.2 x 2.2 x 0.65 inches)
Total hour hand length: approx. 187 mm (7.4 inches)
Total minute hand length: approx. 260 mm (10.2 inches)
Second close nut: approx. 7 mm (0.3 inches)

Package included:

1 x Quartz clock movement
1 x Second close nut
1 x Minute hand
1 x Hour hand
1 X Plastic washer
1 X Brass washer
1 X Brass nut
1 x Metal hook

Product Features

  • .Long spindle quartz clock replacement movement parts with metal hook,Good for repairing, replacing or making a clock.
  • .Young town manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the dimensions.
  • .Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS – Included along with the movements.
  • .Parameter: “I” Shaft,drive long clock hands (10 mm to 450 mm); Total shaft length is 23 mm (29/32 inch), thread length is 12mm (15/32 inch).
  • .High Torque “I” Shaft Clock Movement: suitable for 4 – 8 mm (4/ 25 – 3/10 inches) thickness clock panel.


You May Also Like This Content...

3 thoughts on “Quartz DIY Wall Clock Movement Mechanisms Battery Powered DIY Repair Parts Replacement with 2 Long Hands,3/10 Inch Maximum Dial Thickness,29/32 Inch Total Shaft Length. …

  1. Worked perfect replacing broken works on my giant wall clock. Got my big clock fixed with this.My 24″ wall clock stopped running. I was worried I had to buy a new oneand wouldn’t find one exactly like I wanted. Took me a long time to find this one.Ordered this item and when it showed up, it had instructions for installing intoa clock face that worked perfectly for my clock face.Yeah, the big long hour and minute hands it comes with are flimsy. But it seemsto me they HAVE to be to be light enough for…

  2. Piece of junk, don’t waste your time Don’t even both.It arrived and I noticed that a piece where the battery is put in was bent out, but it still seemed to connect with the battery so I just went with it. Installed the motor and it worked well for about four hours and then wouldn’t work any more.I also ordered the high torque but I don’t see anywhere in the packaging or on the motor where it says that I received the high torque motor… I think they sent me the regular one. I’m trying to decide if it’s worth my time…

Comments are closed.

0 Shares
Tweet
Share
Share
Pin